A-ARM REPAIR KITS
- Includes all the necessary bearings, seals, shafts etc.
- Kits are sold per A-ARM
- Meets or exceeds OEM quality.
A-ARMS
- Heavy duty SCM430/4130 chromoly steel
- Powercoated to reduce corrosion and rust
- Pre-installed ball joint (where applicable)
- Direct OEM fit
AIR FILTERS
- Both OEM and 2 stage filters available
- Made with durable materials to ensure engine protection in tough riding conditions
BALL JOINTS
- Manufactured to the strictest of tolerances for a better fit
- Bronco ball joints are sold individually and include the snap ring and cotter pin (where applicable)
BRAKE PADS
- Offer both Semi-Metallic and full metal pads
- Made with premium materials for optimal performance and longevity
- Meets or exceeds OEM quality
CABLES
- Bronco ATV cables are designed to meet or exceed OEM standards
- We use a stainless Steel inner wire for optimum dursbilty and resistance to corrosion
- Cables come standard with an inner liner which provides a smooth, snag-free pull
- These cables are supplied dry, without lubricant so it is recommended they be lubricated with the proper cable lube prior to use
CARBURETOR REPAIR KITS
- Quality design keeps your carb in top condition, running stronger for much longer
- All Bronco carb repair kits include all of the necessary o-rings, gaskets, float valves and jets needed to rebuild 1 OEM carburetor
CLUTCH KITS
- Bronco steel clutch plates are made of JIS#G3141 carbon steel and precision flattened/smoothed to prevent cable adjustment loss and allow more consistant oil coverage
- The cork based plates are impregnated with an anti-swell aluminum alloy to give smooth clutch take-off
- Anti-swell friction plates ensure smooth take-off and better modulation
CV AXLE BOOT KITS
- We offer OE replacements with no trimming necessary, as well as universal applications
- Exceeds OEM Quality
- Kit includes boot, clamps and MOS2 premium grease bag
CYLINDER KITS
- Bronco cylinder kits come packaged with a Bronco cylinder and Namura Technologies piston and top-end gasket sets. The piston and gasket sets are direct OE-spec replacements.
- Cylinders come Silicone Nickel Carbide plated for advanced wear protection
- Pistons feature MOS2 coated skirts for improved break-in and reduced friction
- Piston heads are machined smooth for better flow rates and reduced carbon build up, and finished with a hard anodizing process for increased durability
- Piston kit includes piston, wrist pin, circlips and ring set
- Top-end gasket sets ship with MLS head gasket (most models), base gasket, exhaust gasket, intake/carb gasket and all associated o-rings and valve stem seals (4-stroke models only)
- All gaskets are asbestos-free and are engineered to withstand temperatures in excess of 300° F
DIFFERENTIAL BEARING AND SEAL KIT
- Kit comes with all needed bearings and seals to rebuild your differentialemium grease bag
- All components meet or exceed OEM parts
- High speed bearings meet ABEC industry precision standards
- Sealed bearings use double or tripple lip seals with stainless steel garter springs to better keep the grease in and the water and dirt out
- Premium grease contains rust and oxidation inhibitors
DUMP BOX SHOCKS
- Restore your Machines Utlitiy capability with Bronco’s HD Dump Box shocks
- Black Nitrogen treated shock shafts for Improved performance and durability
- Larger Eyelet width for increased strength
EXHAUST SPRING / HEADER JOINTS
- Restore your exhaust performance with Bronco’s Exhaust Springs and Header Joints/ Gaskets
- Springs are made from a High Carbon Spring wire (SWRH80C) for improved durability
- Header Joints/ gaskets are made from premium materials for improved performance and longevity
FUEL PETCOCKS
- Fix that leaky petcock with Bronco’s complete bolt on OEM replacment Petcocks
- No rebuilding, easy replacement and instalation
- Meets or exceeds OEM Parts
FUEL PUMP MODULES
- Direct drop in OEM Assembly replacement
- Reduce the hassle of rebuilding your old module
- Restore performance with our plug and play module
- Includes Module, retaining ring and seal
FUEL PUMP REBUILD KITS
- Electric Fuel Pump rebuild kits will include a filter, regulator, wiring and all needed components to rebuild your assembly
- All components meet or exceed OEM Quality
- Restore your fuel system with Bronco’s Fuel pump rebuild kits
GAS SHOCKS
Upgrade those oil shocks to heavy duty gas shocks (where applicable)
- Ready to mount out of the box
- Rugged design comes standard with 10% stiffer springs
- Adjustable preload
- Replacement eyelet bushings available
- All Bronco shocks and struts include springs, retainers, and bumpers (where applicable)
- IMPORTANT! All suspension nuts and bolts are very important parts that could affect the performance of the shock. All components must be tightened to the OEM specified torque and should be periodically checked and tightened if needed.*
GEARSHIFT CABLES
- Restore shifting performance with Bronco’s Gearshift Cables
- OEM Shift Cables are known to stretch outside of available factory shift point adjustments
- Inner core is made of solid steel to reduce cable stretch and compression
- Outer is made of premium Black PVC Insulation
HEATED GRIPS
- Features 4-step push-button switch for customized output and easy temperature control
- Includes premium grips, connecting wires, thumb warmer, switch and mounting hardware
See chart below for more information on settings and performance
WHEEL HUBS
- Manufactured from premium materials and machined to exact OEM specifications
- Includes hub bolts
- Perfect replacement for original factory part.
IGNITION SWITCHES
- Direct bolt on replacement
- Meets or exceeds OEM parts
- Each switch comes with two keys
INDEPENDENT REAR SUSPENSION KIT
- Each kit contains all the parts required to rebuild one side of an ATV Rear Independent Suspension system.
- Bushings are self lubricating and durable, made from a thermoplastic resin.
INTAKE MANIFOLD / CARB FLANGE
- Regain your engines power and peak performance by replacing cracked or broken carburetor flanges
- OEM carburetor flanges are prone to failure due to high heat exposure, heavy vibration due to proximity to the engine, inferior material, and/or exposure to the elements
- All flanges are made of 1051 + 1052 NBR
LEVERS
- We offer both die-cast and forged levers (certain applications)
- These are direct-fit, OEM replacements
LOWER STEERING BEARING AND SEAL KIT
- Upgrade the ball bearings to heavy-duty tapered bearings giving you higher torque load and longer life
- Each kit contains all the necessary bearings, shafts, bushings, and thrust bearings (if required)
MASTER CYLINDER REBUILD KITS
- Each kit contains all necessary components to rebuild a master cylinder
- Meets or exceeds OEM specifications
OIL FILTERS
- Constructed using the best materials available, all oil filters meet or exceed OEM performance levels.
REGULATORS
New replacement meets or exceeds OEM specifications.
- 100% OEM interchangeable.
- OEM style connectors.
- Stock mounting locations.
- Designed to handle increased power loads.
ROTORS
- Designed to work with any style brake pad
- The brake rotor design is lightweight, strong, and efficient at eliminating unwanted heat.
- Manufactured from heat-treated SUS420 stainless steel
- Hardness: HRC32-36
SEAT COVERS
- Designed to fit perfectly on your ATV’s original OEM seat foam and pan
- Black, UV & water resistant, gripper cover that provides additional seating traction under all riding condition
- Lower cost alternative to replacing complete seat when only the cover is damaged
- Includes instructions for quick and easy installation
STATORS
- Restores electrical performance to your machine
- Meets or exceeds OEM quality
- Direct bolt on replacement
TEMPERATURE SENSORS
- Meets OEM sensor spec for ensured cooling performance
- Bolt on OEM replacement
TIE ROD ENDS
- Manufactured to meet or exceed OEM specifications
- Bronco tie rods are sold individually and include the castle nut and cotter pin (where applicable)
- Meeting OEM quality and beating the price of other replacements, Bronco tie rods are a great value
TIRE REPAIR KITS
- The complete tire repair package, everything you need for anything with wheels
- With our durable nylon carrying case you can be sure you won’t lose any parts
- Takes only a few seconds to fill your tire and get back to business. It’s quick and painless, making the Bronco Tire Repair Kit a must have of any enthusiast
- Look below or download the PDF to check out detailed contents of each kit
U-JOINTS
- Our U-Joints are manufactured from SCM 415 steel and boast a hardness rating of HRC 58-61
- All Bronco U-Joints are greasable and include zerks for easy service, extending the life of your drive system
- Includes circlips
VALVES
Offering OEM replacement and high performance stainless steel valves
- Sold individually
- Bronco valves meet or exceed OEM quality, with exhaust valves manufactured from SUH35HT stainless steel & intake valves manufactured from SUH3 Steel
- Performance valves feature a forged one-piece construction, nitride coating, modified radius, swirl polish, chromed stems, and stellite tips. this provides reduced friction for quicker/higher revs and a longer valve life.
WATER PUMP REPAIR KIT
- Includes every gasket, O-ring, bearing and seal required to rebuild a water pump
- Shafts & Impellers also available (sold separately)
WHEEL BEARING KITS
- Includes all Bearings and Seals necessary to do a wheel bearing rebuild.
- High speed bearings meet ABEC industry precision standards.
- Sealed bearings use double or triple lip seals with stainless steel garter springs to better keep grease in and water and dirt out.
WHEEL SPACERS
- Available from 1″ up to 2.5″
- All billet spacers are drilled to allowr stock wheel nuts to be countersunk into them. This ensures a flat surface for the wheel to sit against.
- The outer diameter of each spacer is different and designed to match the OEM Hubs
- Sold in Pairs
- Includes a complete set of lock nuts
- Machined from 6061 T6 Aluminum
WINCHES
- Designed with riders in mind, Bronco’s Heavy Duty winches boast an IP67 waterproof rating which ensures your Bronco winch won’t let you down even when the weather does.
ATV & UTV WINCHES
- Synthetic rope or steel cable line options.
- Available with wireless or wired control.
- Offered in 7 weight ratings (1500 – 2500 – 3000 – 3500 – 4500 – 5000 – 6000lbs).
- Includes 4-way fairlead roller, universal mounting bracket and hardware, handlebar switch and quick connect wiring kit
PORTABLE & PLOW LIFT KITS
- Portable Winches feature a 2000lb capacity and everything you need to keep going in one bag.
- Plow Lift Kits have a 1500lb capacity and a 2700lb tough-strap; easily mounts to push tube and includes a handlebar mounted activation switch.
YOKE
- Perfect complement to any U-joint repair
- Manufactured from SCR440 chromoly steel.
- Built to OEM specifications.
- Available with and without the universal joint
CAM CHAIN
- Manufactured by a leading OEM supplier from premium materials to reduce friction and increase service life.
- “M” style chain gives you maximum strength and durability.
